亚洲日韩中文字幕无码一区-精品一区二区三区自拍图片区-黑人操亚洲女人-一本一道色欲综合网中文字幕-又长又大又粗又硬3p免费视频

Your Current Position:  Common problem
  • Adhesion

    Adhesion is the interaction that develops between two dissimilar bodies when they are in contact. At the molecular level, adhesion is based on physical and in some cases chemical bonding. The strength of adhesion depends on the type of adhesive.


    Pressure sensitive adhesives build up adhesion under light pressure. The ultimate bonding strength is reached after 24 ~ 72 hours.

     

    1.jpg


    Test method: “peel adhesion test” and "initial tack - rolling ball" . For specific data, please refer to TDS.


    Adhesive failure describes the separation of adhesive either from backing or from the substrate. The other basic failure mechanism of an adhesive bond is “cohesive failure” which refers to a fracture in the middle of the bulk adhesive.

     


  • Adhesive

    Adhesives are polymer materials that are used to join dissimilar materials. Adhesives may be classified in many ways, e.g. by mode of application and setting, chemical composition, cost, and suitability for various adherents and end products.


    The term "pressure sensitive adhesive" (PSA) is used to describe adhesives that are permanently tacky in dry form at room temperature. The most common pressure sensitive adhesives are acrylics, natural rubber/resin, and synthetic rubber/thermoplastic rubber. For comparison of basic properties, please refer to the following table:

    1.jpg


  • Ageing resistance

    1.jpg

    Degree of reliable performance of the tape over time, under certain conditions. Depending on the adhesive system being used, PSA tapes are often usable for permanent applications. This permanence is reflected by the resistance of the adhesive against:

    - Ozone (O3), Oxygen (O2)

    - UV light: relevant for transparent substrates such as glass or PC; under direct exposure, yellowing or discoloration of the adhesive or backing (e.g. window bars).

    - Temperature - Humidity, water

    - Different kinds of chemicals …


    Generally acrylic adhesives are much better suited to withstand these environmental influences than rubber adhesives and can maintain their permanent, reliable functionality over many years.


  • Backing

    Materials which “carry” the adhesive. The backing also reinforces the PSA tape and improves handling and processing properties. Most commonly used backing types are: 

    1. Film backings (e.g. PET, PP, PVC, PE)

    2. Paper based backings (e.g. non-woven, tissue)

    3. Foam backings (e.g. PU-, PE-, PVC-foams)

    4. Woven cloth (e.g.rayon, cotton, PA, PET) A specialty PSA tape type is a transfer PSA tape which has no backing. The adhesive is directly coated on the liner.

    5. Other less typical backing materials are cloth, fabrics, metals etc. Overview of backing material characteristics:

    1.jpg


  • Cohesion

    Cohesion describes the inner strength of the adhesive. It mainly determines the holding power (shear resistance of the tape. Test method: “shear resistance test”.

    1.jpg

    Cohesive failure leaves adhesive residue on both the PSA tape backing and the laminated surface, showing that the adhesive broke internally. Easy check with the finger: it sticks on both the substrate and the tape.

    Basically: high cohesion = higher temperature resistance = lower tack = high holding power

    2.jpg


  • Conformability

    The backing of a PSA tape influences its ability to adhere to curved, rough or irregular surfaces. Conformable backings increase the contact area of adhesive and substrate. Foam backings are inherently conformable and can therefore compensate for surface irregularities between the two bonding substrates.

  • Dimensional stability

    Correlates with humidity of liners. Dimensional stability prevents the liner from showing an irregular surface or dimensional change due to absorption of moisture.

    Dimensionally stable liners are mainly PE coated paper liners and Film liners.


  • Double-sided tape

    Comprised of a backing material coated with adhesive on both sides. Usually one adhesive layer is covered with a release liner (closed side) in order to wind the PSA tape in roll form. In d/s tape production the backing is often pre-treated with a primer to enable a maximum anchorage between backing and adhesive. Transfer tape.

    1.jpg

  • Fish eyes

    Optical effect caused by entrapment air between different tape layers on a roll.


  • Foam

    Material containing small holes (cells) distributed throughout the entire body. Most common foams are:

    -AC-foam Ethylene

    -vinylacetate

    -foam (EVA) Polyurethane

    -foam (PU) Polyethylene-foam (PE)


主站蜘蛛池模板: 免费ā片在线观看| 亚洲国产精品无码中文lv| 欧美内射深插日本少妇| 亚洲精品白浆高清久久久久久| 日韩一区二区三区精品| 国产av无码专区亚洲av麻豆丫| 亚洲精品白浆高清久久久久久| 极品尤物被啪到呻吟喷水| 无码gogo大胆啪啪艺术| 亚洲欧美日韩久久精品| 欧美性大战xxxxx久久久| 中文字幕制服丝袜第57页| 三级特黄60分钟在线观看| 最近中文字幕在线中文高清版| 99国产精品99久久久久久| 国产果冻豆传媒麻婆精东| 曰本无码人妻丰满熟妇啪啪| 精品久久无码中文字幕| 精品熟女少妇av免费久久| 无码国产69精品久久久久网站| 久久亚洲国产精品五月天婷| 麻豆网神马久久人鬼片| yw尤物爆乳网站点击进入| 正在播放国产多p交换视频| 中文字幕亚洲综合久久蜜桃| 日本免费a级毛一片| 中文在线а√在线天堂中文| 亚洲av日韩av激情亚洲| 人人妻人人澡人人爽超污| 亚洲一线二线三线品牌精华液久久久| 国产午夜伦鲁鲁| 国产精品99久久久久久猫咪| 小辣椒福利视频导航| 中文字幕日韩三级片| 丁香花电视剧在线看免费| 亚洲国产午夜精品理论片妓女| 激情综合亚洲| 久久久久久人妻无码| 伊人一本到本勒蕉在线| 最近中文字幕国语免费| 亚洲熟妇色自偷自拍另类|